complete-torch-kits-34.html
CW Product Cat UK
35 / 140
35
torch
systems x 11 original. x 11 original is a combined gas welding
and gas cutting torch for manual work. it is an injector torch (i) and is designed according to and satisfies the stringent demands stipulated by the standard en iso 5172. the demands regarding air tightness, mechanical strength, flashback safety, flame stability and the easy adjustment of the torch are the foun- dations for the x 11 system. this means that x 11 original is a quality torch that satisfies very stringent demands from users regarding oper- ability and operational reliability. x 11 original is one of the world's best-selling torch systems. during the final check prior to delivery, each insert and nozzle is lit and the flame is checked. benefits with x -11 original: → potential to weld material with a thickness of 14 mm (normally a maximum of 6 mm) → cuts up to 100 mm with an injector insert (150 mm with pressure cutting attachment) → solders and welds with different heating
and welding attachments → heat for straightening and heat forming → oval, grip-friendly torch handle → large range of accessories x 11 original is available for the fuel gases acetylene and propane (lpg). with propane, the torch's use is limited to cutting, soldering and heating. welding the welding attachments are entirely forged in copper and chrome- plated for effective heat dissipation and to deflect weld spatter. for weld locations that are difficult to access, there are a range of flexible welding attachments that are not chrome-plated. all welding attachments have replaceable welding nozzles. cutting x 11 original has several different cutting attachment alternatives: → lever valve or wheel valve for the cutting oxygen → acetylene or propane → injector or pressure torch → nozzle mount 90° or 0° → several different ranges of cutting nozzles soldering and heating in addition to welding attachments, there is a single flame heating at- tachment and multiple flame heating attachments with shower nozzles. → single flame inserts are used when narrow heating zones are sought → multiple flame inserts are most suitable for wide heating zones and when the entire workpiece is to be heated up welding, soldering and heating small parts and thin sheet metal. mixer add-on for x 11 original mixer for low working pressures and various nozzle tips for small gas flows. the mixer add-on works according to the pressure principle, which means that oxygen and fuel gas have the same inlet pressure to the noz- zle tips. a mixer (mixing nozzle) it suitable for seven sizes of nozzle tip, ranging from 25 to 370 l/h. the nozzle tips are entirely forged in copper. mixers are available for both acetylene and propane. with propane, the area of application is limited to soldering and heating. when propane is used, the propane hose must be connected to the torch handle. this is important, as acetylene and propane react differently to the material in the hose. note! torch systems. x 11 – torch system for welding, cutting, soldering, heating, etc.
attachment-welding-cutting-36.html