pressure-bar-gauge-21.html
CW Product Cat UK
22 / 140
22 work content work connection aga no. / part no. area
pressure
pressure
inlet thread outlet (
bar
) gauge (
bar
) gauge (
bar
) acetylene 0 – 1,5 0 – 30 0 – 5 g ¾” ext. r 1” 203 001 340 / 300027 oxygen 0 – 15,0 0 – 300 0 – 30 w 21.8 x ◂” int. r 1” 203 000 370 / 300032 argon/mison ® 0 – 15.0 0 – 300 0 – 30 w 24.32 x ◂” int. r 1” 203 007 360 / 300022 work content work connection aga no. / part no. area
pressure
pressure
inlet thread outlet (
bar
) gauge (
bar
) gauge (
bar
) nitrogen 200 0 –
315
0 –
315
w 24.32 x ◂” ext. w 21.8 rh 203 004 601 / 300004 air 200 0 –
315
0 –
315
g ▾” ext. w 21.8 rh 203 002 601 / 300005 oxygen 200 0 –
315
0 –
315
w 21.8 x ◂” ext. w 21.8 rh 203 000 601 / 300026 regulators. regulators for high
pressure
and flows. unicontrol 600. cr 60 is a regulator for large gas outlets. suitable for cutting more than 300 mm and flushing large pipe systems. supplied with a 12 mm hose fitting for acetylene and an 8 mm fitting for oxygen, as well as 3 extra gaskets. cr 60. unicontrol 600 is a regulator for high working
pressure
, e.g.
pressure
testing. the working
pressure
is adjusted with a robust regulator screw. when the cylinder
pressure
is approx. 5
bar
above the working
pressure
, the capacity is approx. 75 m 3 /h for hydrogen and helium, and approx. 18 m 3 /h for the other gases. a ¼” clamping ring connection is supplied, as well as 3 extra gaskets. regulators capacity curves - acetylene inlet
pressure
- p 1 =
bar
0 5 10 15 20 25 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.5 gas flow, m 3 / h working
pressure
,
bar
p 1 =15 p 1 =2 capacity curves - oxygen inlet
pressure
- p 1 =
bar
0 20 40 60 80 100 0 2 4 6 8 10 12 14 16 gas flow, m 3 / h working
pressure
,
bar
p 1 =100 p 1 =100 p 1 =21 p 1 =21 a high
pressure
hose must be used when
pressure
testing. note!
shielded-arc-welding-23.html