capacity-conveyor-chain-3.html
102062 Agro brochure ENG
4 / 40
4 | www.jema.as
chain
& fl ight
conveyor t44, cap. 20-40 t/h chain & fl ight conveyor t45, cap. 40-80 t/h chain and fl ight conveyor t44/t45 for grain intake pit consists of elements in 1.5 mm. thick galvanised steel. several of the elements are the same as in chain elevator t20/t40, for example; closed elevator boot, drive
station, roller chain fi tted with riveted rubber carriers. the extensions for the chain and fl ight conveyor, outside the grain intake pit, are the same as the extensions for the chain elevator. the chain and fl ight conveyors t44/ t45 can be joined with 45° or 90° bend and chain elevators t20/t40 and can combine horizontal and verti- cal conveyance at full capacity driven from only one motor. the capacity of the chain and fl ight conveyor is controlled by adjusting the inlet plates in the inlet trough up and down. t44 can be adjusted from a capacity of 20 t/h to 40 t/h, whilst t45 can be adjusted from 40 t/h to 80 t/h. to obtain 40 t/h and 80 t/h it is essential that the conveyor is horizontal and a wide drive station is used. the chain and fl ight conveyors consist of drive station, closed elevator boot/ tightening section, roller chain with riveted rubber carriers, inlet trough, connecting fl ange – inlet trough/ extension and outlet trough. the drive station is fi tted with a tight- ening device. t44/t45 may be driven by a v-belt pulley drive (1,000 r.p.m.) or a conical wheel geared motor. the geared motor may be mounted on either side of the drive station.
t45-t44-motor-5.html