water-cylinder-never-5.html
Balance manual EN_SE_DK_NO_FI
6 / 44
6 using the
sparkling
water
maker your new sparkling water maker enables you to carbonate your own water, which you can then flavour with concentrates from aqvia . to carbonate your own water, you need the aga 425 g carbon dioxide gas cylinder
supplied with the sparkling water maker. when this cylinder is empty, a replacement can be bought from the store where you made your original purchase and the old bottle returned for deposit. inserting the gas cylinder remove the seal and the protective cap from the cylinder. keep the cap in a safe place as it will be needed when you replace the cylinder when empty. place the carbonator on a flat surface and remove the back cover of the machine: hold in the catches on the side and angle the cover backwards and then lift it upwards. tilt the sparkling water maker forwards and insert the gas cylinder through the opening in the bottom of the machine so that the cylinder is standing on the work surface. gently tilt the sparkling water maker back so that the upper part of the machine rests against the threaded neck of the cylinder. screw the cylinder into the machine as far as it will go (see illustration), at which point the sparkling water maker will have returned to its original resting position. make sure that the cylinder is firmly in place. now replace the back cover by inserting the bottom lip into the hole in the base and then angling the cover forward carefully until you hear a click from the catches.
water-bottle-use-7.html