cutting-nff-torch-66.html
CW Product Cat UK
67 / 140
67 torch systems the
lance
works quickly and quietly in aluminium, stainless steel, cast iron, copper and concrete. the
lance
(torch
lance
) is a tool for making
hole
s and
cutting
in hard materi- als (reinforced concrete, natural stone, kiln bricks, acid-resistant steel, cast iron). the
lance
works without noise or vibrations. areas of application: all
cutting
of scrap, sheet pile walls, underwater
cutting
and similar
cutting
of materials where normal thermal
cutting
cannot be used. work execution the
lance
is lit against a wood block with a small volume of oxygen, and applied at an angle against the surface to be processed. when the
lance
has begun to burn, the oxygen pressure is increased. the
lance
burns at a tem- perature of approx. 3,000°c, at which concrete and similar materials sinter ("melt").
hole
diameter approx. 40 mm. an area of approx. 30 mm around the torch
hole
is affected by the heat generation. the
lance
can be bent, making it possible to make
hole
s behind obstacles such as pipelines, etc. the
lance
can be extended to a number of lengths. if a larger
hole
diameter is required, two or more
lance
s can be connected in parallel. aga no. / part no.
lance
holder model c, incl. non-return valve / 316653
lance
holder model w, incl. non-return valve / 330468
lance
ø 16 x 3000 / 300736 hose fitting 8 mm / 316810 nut / 316811
lance
ø mm
cutting
direction
hole
oxygen, bar consumption during
hole
making
cutting
speed diameter mm oxygen m 3
lance
m time min. mm/min 16 (▸") horizontal 40 6,0 2,3 5,4 5,4 190 16 (▸") overhead 40 6,0 2,5 6,0 6,0 165
lance
holder model c, incl. non-return valve
lance
holder model w, incl. non-return valve hose fitting 8 mm nut
lance
.
cutting
equipment.
cutting-powder-torch-68.html
