complete-kits-equipment-48.html
CW Product Cat UK
49 / 140
49 x 21 original is a combined gas
welding
and gas
cutting
torch
for manual work. it is a pressure
torch
(ii) that is designed on the basis of the stringent demands stipulated by standard en iso 5172. stringent demands regarding airtightness, mechanical strength, flash- back safety and flame stability are the foundations for the x 21 system. x 21 satisfies the high expectations that users have of a quality
torch
. with the x 21 pressure
torch
, the gases are mixed in the
torch
head, which increases safety against flashbacks. pressure
torch
es entail that oxygen and fuel gas for the heating flame have the same inlet pressure to the nozzle. the
cutting
oxygen is supplied in a separate gas duct to the
cutting
nozzle. this provides the potential to have higher pressure for the
cutting
oxygen, which means that larger material thicknesses can be cut. benefits with x 21 original: → choose between round and oval
torch
handle → colour marking: red for fuel gas and blue for oxygen on the handle * and
cutting
attachment → potential to weld material thicknesses up to 14 mm → cut up to 500 mm → heat for straightening and heat forming → special flame-straightening
torch
es → flame-cleaning
torch
es → large range of accessories → suitable for powder
cutting
x 21 original is available for the fuel gases acetylene and propane (lpg). using propane as the fuel gas, all the processes apart from gas
welding
can be used.
welding
the
welding
attachments, 8 inserts from 40 1250 l/h, are entirely forged from copper and chrome-plated for efficient heat dissipation and to deflect weld spatter. for weld locations that are difficult to access, there are four flexible
welding
attachments, ranging from 80 to 500 l/h, that are not chrome-plated. all
welding
attachments have replaceable
welding
nozzles.
cutting
x 21 original for
cutting
: →
cutting
attachment with lever valve or wheel valve → acetylene or propane → nozzle mount 90°, 75°, 45° and 0° → material thicknesses up to 500 mm → several different series of 3-cone sealed
cutting
nozzles → various alternative gouging nozzles → rivet
cutting
nozzles → available both as injector and pressure
torch
es soldering and heating in addition to various
welding
attachments, there are three single flame heating attachments for acetylene, ranging from 1800 to 5000 l/h, as well as three multiple flame heating attachments ranging from 1000 to 5000 l/h. in addition there are four multiple flame heating attachments for propane, ranging from 1000 to 7000 l/h. select the correct nozzle according to the choice of fuel gas: acetylene ha-311 or coolex ® a-311 propane coolex ® p -331 natural gas thermolen ® my-339 when propane is used, the propane hose must be connected to the
torch
handle. this is important, as acetylene and propane react differently to the material in the hose. note!
torch
systems. x 21 original with large capacity for
welding
,
cutting
, soldering, heating, etc. x 21 original.
torch
systems
attachment-cutting-welding-50.html
