pressure-regulator-bar-24.html
CW Product Cat UK
25 / 80
25 regulators for high
pressure
and flows unicontrol 600. capacity curves - acetylene inlet
pressure
- p 1 =
bar
0 5 10 15 20 25 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.5 gas flow, m 3 / h working
pressure
,
bar
p 1 =15 p 1 =2 capacity curves - oxygen inlet
pressure
- p 1 =
bar
0 20 40 60 80 100 0 2 4 6 8 10 12 14 16 gas flow, m 3 / h working
pressure
,
bar
p 1 =100 p 1 =100 p 1 =21 p 1 =21 cr 60. smoothflo ® - mison ® /argon work area (
bar
) content
pressure
gauge (
bar
) work
pressure
gauge (l/min) connection part no. inlet thread outlet acetylene 0 ? 1.5 0 ? 30 0 ? 5 g ¾? ext. r 1? 300027 oxygen 0 ? 15.0 0 ? 300 0 ? 30 w 21.8 x 1 / 14 ? int. r 1? 300032 argon/mison ® 0 ? 15.0 0 ? 300 0 ? 30 w 24.32 x 1 / 14 ? int. r 1? 300022 gaskets see page 17. unicontrol 600 work area (
bar
) content
pressure
gauge (
bar
) work
pressure
gauge (l/min) connection part no. inlet thread outlet nitrogen 0 ? 103 0 ?
315
0 ?
315
w 24.32 x 1 / 14 ? int. w 21.8 rh 323191 nitrogen 0 ? 200 0 ?
315
0 ?
315
w 24.32 x 1 / 14 ? int. w 21.8 rh 300004 air 0 ? 200 0 ?
315
0 ?
315
g 5 / 8 ? int. w 21.8 rh 300005 oxygen 0 ? 200 0 ?
315
0 ?
315
w 21.8 x 1 / 14 ? int. w 21.8 rh 300026 gaskets see page 17. cr 60 is a regulator for large gas outlets. suitable for cutting more than 300 mm and flushing large pipe systems. supplied with a 12 mm hose fitting for acetylene and an 8 mm fitting for oxygen, as well as 3 extra gaskets. unicontrol 600 is a regulator for high working
pressure
, e.g.
pressure
testing. the working
pressure
is adjusted with a robust regulator screw. when the cylinder
pressure
is approx. 5
bar
above the working
pressure
, the capacity is approx. 75 m 3 /h for hydrogen and helium, and approx. 18 m 3 /h for the other gases. a ¼? clamping ring connection is supplied, as well as 3 extra gaskets. a high
pressure
hose must be used at the outlet. note!
cutting-gas-cut-26.html
