cutting-torch-gas-47.html
CW Product Cat UK
48 / 80
48
cutting
equipment the lance
works quickly and quietly in aluminium, stainless steel, cast iron, copper and concrete. the lance (torch lance) is a tool for making holes and cutting hard materials (reinforced concrete, natural stone, bricks, acid-resistant steel, cast iron). the lance works without noise or vibrations. areas of application: all cutting of scrap, sheet pile walls, underwater cutting and similar cutting of materials where normal thermal cutting cannot be used. work execution the lance is lit against a wood block with a small volume of oxygen
, and applied at an angle against the surface to be processed. when the lance has begun to burn, the oxygen pressure is increased. the lance burns at a temperature of approx. 3.000°c, at which concrete and similar materials sinter ("melt"). hole diametre approx. 40 mm. 316653, lance holder model c, incl. non-return valve lance. part no. lance holder model c, incl. non-return valve 316653 lance ø 16 x 3000 300736 hose fitting 8 mm 316810 nut 316811 lance lance ø mm cutting direction hole diametre oxygen consumption during hole making cutting speed mm bar oxygen m 3 lance m time min. mm/min 16 ( 3 / 8 ?) horizontal 40 6.0 2.3 5.4 5.4 190 16 ( 3 / 8 ?) overhead 40 6.0 2.5 6.0 6.0 165 316810, hose fitting 8 mm 316811, nut an area of approx. 30 mm around the torch hole is affected by the heat generation. the lance can be bent, making it possible to make holes behind obstacles such as pipelines, etc.
cutting-powder-337-49.html
