acetylene-flame-pressure-31.html
CW Product Cat UK
32 / 80
32 toolboxes 13. heating
attachment
s for
propane
. 14-17.
cutting
attachment
s and hole-
cutting
attachment
s for pressure torch. rule of thumb for heating and straightening. 13. heating
attachment
s,
propane
type of heating
attachment
gas flow part no.
propane
13.
propane
multiple flame 90 300410 15.
propane
multiple flame 1000 300351 material thickness x 2.5 x 100 = size heating
attachment
heating output kw ac/ox flame eg: 7 mm x 2.5 x 100 = 1.750 l/h 20 eg: 10 mm x 2.5 x 100 = 2.500 l/h 29 multiple flame heating
attachment
propane
propane
pressure: 0.2 - 0.8 bar oxygen pressure: 2.5 bar 300374,
cutting
attachment
injector, acetylene 300373,
cutting
attachment
injector,
propane
300379, hole-
cutting
attachment
injector, acetylene 300350,
cutting
attachment
pressure torch, acetylene or
propane
12 ? 15.
cutting
attachment
s and hole-
cutting
attachment
s for pressure torch injector length
cutting
attachment
mm total length with handle mm angle of torch head qty in sb pack part no.
cutting
attachment
90° injector oxygen/acetylene with lever 170 350 90°hv 1 300374
cutting
attachment
90° injector oxygen/
propane
with lever 170 350 90°hv pr 1 300373
cutting
attachment
0° hole cutter injector oxygen/acetylene 170 350 0°rv 1 300379 ? nozzle nut for injector torch 2 309350 pressure torch
cutting
attachment
90° pressure torch with lever 170 350 90°hv 1 300350 ? nozzle nut for pressure torch 1 300595 hv = lever for
cutting
oxygen when using x11 pressure torches and to obtain capacity for
cutting
150 mm thick steel, the hose fitting and hose must have a dimension of ø 6.3 mm. note! ? the figures refer to the picture on page 29.
cutting-nozzle-oxygen-33.html
